Lumatek Dimmer Box 3-Pin PRO – Manual dimmer for all Lumatek LED lighting series ZEUS - ATS - VF

The Lumatek Dimmer Box 3-Pin PRO is designed as an original accessory for Lumatek LED lighting systems. It connects directly to the 3-pin DIM port of compatible fixtures and allows for quick and easy control of light intensity without the need for a digital control panel.

The mechanical switch allows you to choose between several preset power levels – 25%, 50%, 75% and 100% , which allows you to adapt the lighting according to the phase of plant development. Reducing the light intensity is especially useful during germination, rooting and early vegetation, when young plants do not need maximum light output.

The dimmer is compact, easy to install and requires no additional configuration. Simply connect to compatible LED lighting and it is ready to work. It is suitable both as a replacement for the original dimmer and as a spare accessory.

Technical characteristics

✔️ Manufacturer: Lumatek

✔️ Model: Dimmer Box 3-Pin PRO

✔️ Type: Manual dimmer for LED lighting

✔️ Connection: 3-pin connector

✔️ Power adjustment:

• OFF
• 25%
• 50%
• 75%
• 100%

Compatibility

Compatible with select Lumatek LED lighting models, including:

✔️ Lumatek VF 90W LED

✔️ Lumatek VF 120W LED

✔️ Lumatek ATS 200W PRO (ATTIS)

✔️ Lumatek ATS 300W PRO 2.7-3.1

✔️ Lumatek ZEUS 465W Compact PRO

✔️ Lumatek ZEUS 465W PRO 2.3-3.1

✔️ Lumatek ZEUS 600W 2.3-3.1

✔️ Lumatek ZEUS 1000W 2.3-3.1

✔️ Other Lumatek models equipped with a 3-pin DIM input .

Advantages

✔️ Original Lumatek accessory

✔️ Easy adjustment of light output

✔️ Dimming levels: 25%, 50%, 75% and 100%

✔️ Plug & Play installation

✔️ No programming required

✔️ Compact and easy to use

✔️ Suitable as a spare or replacement dimmer

✔️ Provides optimal light intensity for different growth phases.

📋 Method of use

1. Disconnect the LED light fixture from the electrical outlet.
2. Connect the dimmer to the 3-pin DIM port on the lighting.
3. Turn on the light fixture.
4. Select the desired power level – 25%, 50%, 75% or 100% .
5. If necessary, change the intensity according to the plant development phase.

💡 Tip from Urban Botaniks: Use lower light levels (25–50%) during germination and rooting, increase to 75% during vegetation, and use 100% power during the flowering phase, when plants have the highest light requirements.