Timers and Controllers

Hager Power Panel 48x600w, 8x continu en 3x kachel/heater

The Lighthouse wireless thermostat is ideal for most heating appliances. This includes infrared heaters , tube heaters , " blower " stoves, underfloor heating and mobile radiators , as well as various types of cooling appliances .

• Plug and Play ( just connect it to the power grid and turn it on , no installation required )
• automatic wireless connection between the movable thermostat and the switch
• possibility to choose a " heating " or " cooling " function, depending on the preferred device for use
• built-in temperature sensor
• multi-channel - one movable thermostat can control several switches
• removable design suitable for placement or wall mounting
• shows current and desired temperature in degrees ºC or ºF
• LCD backlight with battery life-saving automatic shutdown
• low battery warning

TechGrow S-Eco CO₂ Sensor (2000ppm) is a budget sensor for measuring the CO₂-concentration in your growroom. 

• Accurate measurements of CO₂-concentration in the growing room every second
• Built-in light sensor
• Automatic switching between day and night mode
• Automatic basic calibration (ABC function)
• Range: 0 - 2000ppm
• Accuracy: 75ppm
• Response time: 60seconds
• Warranty: 6 months

TechGrow S-2 CO2 Sensor (2000ppm) measures CO₂ and detects light. It is compatible with all TechGrow controllers. The sensor is equipped with a built-in calibration function so you can calibrate the CO₂ sensor against outdoor air. The calibration menu is only accesible through a CO₂ controller. Also equipped with a built-in switch to prevent unwanted calibration. 

• range: 0 - 2000 ppm

Lumatek Control Panel (HID) is a digiatl lighting controller, one of the best on the market right now, which monitors room temperatures, light timing, automation, safety control and dimming.

• controls up to 400 ballasts 
• can be connected to Lumatek dimmable ballasts 315W, 600W, 630W and 1000W
• power dimming range: 60-100%
• personalized sunrise & sunset
• safety and temperature control mechanisms
• intelligent room maintenance

TechGrow - CO₂ Pressure Reducing Valve the easiest and most effective way to inject CO₂ in the growroom. Connect it to the CO₂-bottle to control the flow of CO₂ in the room. Use in combination with TechGrow - CO₂ Controllers. The product consists of:

• pressure meter
• flow meter
• electric magnetic valve

TechGrow S-4 CO2 Sensor (2000ppm) is the all-in-one sensor measures CO₂, temperature, humidity and detects light simultaneously. Also, the sensor is equipped with a built-in calibration function to calibrate the CO₂ sensor against outdoor air. The calibration menu is only accesible through a CO₂ controller. Also equipped with a built-in switch to prevent unwanted calibration.

• range: 0 - 2000 ppm

The TechGrow T-Nano CO₂ Controller ECO is a powerful and easy-to-use CO₂ regulator from TechGrow's budget series - ECO. The T-Nano performs extremely accurate measurements regardless of the size of your indoor grow room - from small tents to very large spaces. When connected to the TechGrow S-4 sensor, the T-Nano can facilitate connection to another TechGrow controller.

key functions:

• controls: CO₂
• measures: CO₂
• PPM range: 300 - 2000ppm
• day/night detection: yes
• light sensor: in the CO₂ sensor

power supply:

• input: 100/240V, 50/60 Hz
• CO₂ output power: 100 – 220V
• consumption: 3W
• CO₂ relay: 8A
• CO₂ fuse: 4A
• power cable: 3 x 0.75 / 1.7m

Note: the sensor is sold separately!

TechGrow T-Micro CO₂ Controller is the smallest TechGrow controller. A complete and very easy to operate CO₂ controller. Best in its class thanks to its completely digital technique.

• Power supply: 100 to 240V (automatic)
• Power frequency: 50 to 60Hz
• Consumption: 3W (with sensor, without CO₂-source)
• Adjustment range CO₂ set: 300 to 2000ppm
• Adjustment range CO₂ +/-: 20 to 200ppm (advice 50 ppm)
• Measurement time: 1 measurement per second
• Cable: UTP network 5m included

Note: the sensor is sold separately!

This completely redesigned controller is just as easy to use as the other TechGrow devices with which it is compatible. The TechGrow T-1 Pro CO₂ Controller measures and controls the CO₂ value in an area. It automatically switches between day and night modes by means of the external sensor.

• Power supply: 100 to 240V
• Consumption: 3W (with sensor, without CO₂ source)
• Adjustment range CO₂ set: 300 to 2000ppm
• Adjustment range CO₂ +/-: 20 to 200 ppm (advice 50 ppm)
• (hysteresis/bandwidth)
• Measurement interval: 1 measurement per second

Note: the sensor is sold separately!