TechGrow

TechGrow - Temperature Probe Sensor (5m) is the simplest TechGrow sensor that measures temperature. Compatible with various TechGrow devices.

• measures the temperature
• cord length: 5m

TechGrow - Clima Eco 5A (Minimum speed) controls the minimum fan speed until the desired temperature in the growroom is reached or maintained. This budget controller is easy to operate with - there are only two rotary knobs - to set the minimum fan speed and the desired room temperature.

• Controls the minimum fan speed until the desired temperature is reached or maintained
• Minimum fan speed setting range: 10% - 100%
• Temperature setting range: 15° - 35°C
• Hysteresis: 2°C
• Minimum required sensor: TempProbe (not included)

TechGrow - Clima Eco 5A (Min-Max speed) controls the minimum and maximum fan speed until the desired temperature in the growroom is reached or maintained. The controller is easy to operate with - there are only 3 rotary knobs - to set the minimum fan speed, the maximum fan speed and the desired room temperature. Ensure constant maintenance of the desired climate conditions at affordable cost!

• Controls the minimum and maximum fan speed until the desired temperature is reached or maintained
• Minimum fan speed setting range: 10% - 100%
• Maximum fan speed setting range: 50% - 100%
• Temperature setting range: 15° - 35°C
• Hysteresis: 2°C
• Minimum required sensor: TempProbe (not included)

TechGrow - Clima Micro Day / Night Fan Controller 5A is a controller that regulates the speed of your fan in two operating modes - day and night. You can easily set the desired speed with the rotary knobs, as well as a delay time of 0 to 10 minutes. The controller does not connect to a sensor and does not measure CO2, temperature or humidity!

• Very easy to use
• Adjustable fan speed for day and night mode
• Adjustable delay time up to 10 minutes
• Built-in light sensor

TechGrow Sensor Temp/RH  measures temperature, humidity (RH) and detects light simultaneously. These values are shown on the display of your controller. TechGrow Sensor Temp/RH can be connected to various devices. Depending on your TechGrow controller, the sensor will control temperature and/or humidity. The built-in light sensor can be switched off when using a S-2 sensor or a T-Mini CO₂ controller.

TechGrow Clima Eco 5A (Temp-RH) controls the minimum fan speed until the desired temperature and relative humidity in the growroom are reached or maintaned. This budget controller is easy to operate with - there are only three rotary knobs - to set the minimum fan speed, for the value of relative humidity and for the desired room temperature.

• Controls the minimum fan speed until the desired temperature and relative humidity are reached or maintaned
• Minimum fan speed setting range: 10% - 100%
• Relative humidity setting range: 40% - 90%
• Temperature setting range: 15° - 35°C
• Hysteresis: 2°C
• Minimum required sensor: Sensor Temp / RH (not included)

The Humi Heavy is specially designed for controlling powerful dehumidifiers. Thanks to the extra heavy components, this controller can switch devices up to 10А.

• Power supply: 100 to 240V
• Mains frequency: 50 to 60Hz
• Own Consumption: 3W
• Switching capacity: 2300W / 10A
• Setting range RH set: 10 – 90% R.H.
• Setting range RH +/-: 0 – 5% air humidity

TechGrow - Clima Micro Plus 5A (Min speed) controls the minimum fan speed until the desired temperature in the growroom is reached or maintained. This efficient controller is easy to operate - there are only two rotary knobs - to set the minimum fan speed and the desired room temperature. There is also an option to adjust the hysteresis (1°C - 5°C).

• Controls the minimum fan speed until the desired temperature is reached or maintained
• The display shows the current temperature as well as the set temperature, fan speed, minimum and maximum measured temperature and hysteresis
• The LED indicates a stable climate or high temperature
• Minimum fan speed setting range: 10% - 100%
• Temperature setting range: 15°C - 35°C
• Hysteresis setting range: 1°C - 5°C
• Minimum required sensor: TempProbe (not included)

TechGrow Clima Control ECO 8A can control up to 2 fans and precisely creates the desired climate in your indoor garden. It accelerates more slowly than other controllers to achieve a more stable climate. With the rotary knobs, you can easily set the desired temperature and hysteresis, as well as the minimum and maximum fan speed.

key functions:

• controls and displays: temperature
• day/night detection: no
• light sensor: no
• heater relay: no
• temperature alarm: no

software functions:

• temp. range: 10 - 45°C
• temp. hysteresis: 0 - 7°C
• temp. settings: day
• humidity settings: no
• day/night delay: no
• min. max. values: no

power supply

• power supply: 100 - 240V
• consumption: 3W
• fuse: 8A
• max. load: 1700W
• power cable: 3 x 1.5 / 1.7m

The Day/Night Fan Controller 7A is the easiest to use climate control device by TechGrow for your indoor garden. The controller is very efficient and fully 'plug & play' (just connect it to the mains and turn it on). To adjust the day and night speeds of your fan, you can use the two rotary knobs, and the settings will switch automatically thanks to the built-in light sensor.

key functions:

• controls: fan speed
• display: no
• day/night detection: yes
• light sensor: yes, built-in
• thermal relay: no
• temperature alarm: no

power supply:

• input: 100 - 220V
• consumption: 3W
• fuse: 8A
• triac: 12A
• power cable: 3 x 0.75 / 1.7m

Note: no connection for sensors available!

TechGrow Clima Control ECO 15A can control up to 2 fans and precisely creates the desired climate in your indoor garden. It accelerates more slowly than other controllers to achieve a more stable climate. With the rotary knobs, you can easily set the desired temperature and hysteresis, as well as the minimum and maximum fan speed.

key functions:

• controls and displays: temperature
• day/night detection: no
• light sensor: no
• heater relay: no
• temperature alarm: no

software functions:

• temp. range: 10 - 45°C
• temp. hysteresis: 0 - 7°C
• temp. settings: day
• humidity settings: no
• day/night delay: no
• min. max. values: no

power supply

• power supply: 100 - 240V
• consumption: 3W
• fuse: 15A
• max. load: 3400W
• power cable: 3 x 1.5 / 1.7m

The Day/Night Fan Controller 14A is the easiest to use climate control device by TechGrow for your indoor garden. The controller is very efficient and fully 'plug & play' (just connect it to the mains and turn it on). To adjust the day and night speeds of your fan, you can use the two rotary knobs, and the settings will switch automatically thanks to the built-in light sensor.

key functions:

• controls: fan speed
• display: no
• day/night detection: yes
• light sensor: yes, built-in
• thermal relay: no
• temperature alarm: no

power supply:

• input: 100 - 220V
• consumption: 3W
• fuse: 15A
• triac: 24A
• power cable: 3 x 1.5 / 1.7m

Note: no connection for sensors available!