Ventilation and Climate

Flexible Silencer ⌀ 315mm for reducing noise levels in ventilation systems. To be installed after the exhaust fan. Do not bend more than 90 °!

• diameter: 315mm
• length: 1m

Garden Highpro PROFAN TT EXTRACTOR FAN 150 is a two-speed fan with a 100% copper engine (for better efficiency). The clamps in the housing allow it to be easily removed (for cleaning or change the direction of the airflow) without having to disconnect the air ducts.

• diameter: ⌀ 150mm
• 1^st  speed: 30W, 1680 rpm, 405m³/h
• 2^nd speed: 60W, 2460rpm, 520m³/h

Can Inline 300 is an active carbon filter for air filtration. It is ideal for use in spaces where there is no room for a filter and can be easily put outside the working space. Can Inline allows 100% filtration in both directions - whether you push or pull air through.

• capacity: 300m³/h
• flange: ⌀ 125mm
• steel housing
• carbon bed: 2.5cm
• can be put inside and outside the working space
• minimum of 18 months lifespan*

With this air distribution hose you supply fresh air and improve the climate in the growroom.

• diameter: ⌀ 160mm
• length: 10m

VENTS VK 200 780m³/h is a turbine fan that can be used for supply or exhaust in the ventilation systems of commercial, office and other premises. Due to the corrosion-resistant durable plastic casing, these models are the perfect solution for the installation in exhaust ventilation systems in humid premises such as bathrooms, kitchens etc.

• casing made of high-quality durable plastic
• single-phase external rotor motor equipped with self-resetting overheating protection
• motor equipped with ball bearings for a long service life designed for at least 40 000 operating hours

Dehumidifier TWE-55L is a professional device designed for quick and permanent reduction of humidity, such as after construction and repair works, during restoration after floods and accidents. It is suitable for spaces with larger volumes, in which it is necessary to maintain humidity below a certain value.

• consumption: 750W
• up to 55L / 24h dehumidification
• setting from 26 to 90% RH in 1% and non-stop operation mode
• counter for the time worked (current and total)
• permanent mechanical filter to retain dust and other contaminants
• possibility to remove the exhaust air with an air duct
• built-in drainage pipe 5m
• dimensions H x W x L: 64.0 x 54.5 x 50.0cm
• weight: 38.0kg
• warranty: 2 years

Refreshing coolness has never been so readily available as with the Cyclone Wall Fan 45cm with Cord. Clean, compact and highly functional, this fan is the perfect choice for any household or workspace.

Connect air ducts easily to your OptiClimate with this pressure box!

The OptiClimate discharge box has a robust insulating jacket and mounts to the rear of your OptiClimate 6000 PRO3 air conditioning system. With the help of and it is possible to place the OptiClimate outside the growing room . And in case you connect it with a 3-way non-return valve *, you can use your OptiClimate in two separate rooms .

• allows the placement of the OptiClimate climate system outside the grow room
• can be used to divide one OptiClimate air conditioning system into two separate rooms
• compatible with OptiClimate 6000 PRO3
• four perforated holes for easy attachment of air ducts
• dimensions: 48 x 40 cm
• hole diameter: ⌀ 250mm

Combiconnect ⌀ 127mm - 10m is an aluminium flexible air duct with a built in steel spiral wire with a high tensile and flexural strength covered with a PVC sheath for even more strength.

• diameter: ⌀ 127mm
• length: 10m
• PVC sheath for even more strength

Flange ⌀ 250mm. The flange is used for connecting:

• an air duct to a fan box
• to a reducer with a female coupling

Reducer ⌀ 125-200mm. The reducer is used for connecting:

• two separate air ducts with different diameters
• two female couplings with different diameters
• female coupling with an air duct with different diameters