Promotions

reflector rail

Moves the lighting back and forth along a 220cm long rail. In this way, it can be placed closer to the plants, since it does not stay in one place for long.
Increases lamp efficiency and life.



SAVE ELECTRICITY and increase efficiency
Travel speed - 3-3.30 minutes in one direction
Movement pause from 2 to 120 seconds.
Adjust the movement speed
Possibility to limit the lifting by means of clamps.
Holds up to 10 kg
Drive motor power: 12W

The Back-up Ventilation Protection is a portable ventilation system that prevents unwanted odors from escaping. Turns on automatically in case of a power shortage. The built-in UPS and battery allow air extraction for up to 7 days, without any supply from the mains. The Back-up is compact and portable, making it suitable for a temporary ventilation system.

• automatically starts air extraction in case of power shortafe
• work up to 7 days without power supply
• compact and portable
• 4 fan speeds
• easy to install
• battery charges automatically
• display showing battery level and alarm
• max. air flow rate: 400m³/h
• diameter: ⌀ 125mm
• weight: 31kg

MH bulb / lamp for the growing / vegetation phase.

• Socket: E40
• Covering area: 0.40 m²
• Luminous flux: 21 000 Lm
• Energy conversion efficiency: 84 Lm/W
• Average life: 20 000 h
• Colour temperature: 4200 K

• Input Voltage: 240 Volt
• Input Current at 100%: 3.5 Amps
• Input Current at 110%: 3.9 Amps
• Input Power at 100%: 795 Watt
• Input Power at 110%: 870 Watt
• Lamp: Gavita Pro 750 W 400V EL DE HPS K12 x 30S

Adjustable electronic ballasts Gavita DigiStar - silent, cool, safe and more efficient!

Note: The ballast is designed to work with a 400V bulb and does not include a cable from the ballast to the lamp!

DLM-4 Zone Controller is specially designed for controlling all DLI* fixtures.

• can control up to 1020 fixtures
• up to 4 separate temperature sensors
• controls 255 fixtures and 1 sensor per zone (up to 4 zones)
• compatible with all DLI fixtures*
• easy to install

The cross piece is used for connecting three air ducts to a female coupling.

A step-up transformer that allows you to drive fans without the low-frequency sound at low speed.

The six stages of control help to better control the exhaust fan according to the temperature and humidity settings you have set.

The four buttons allow setting temperature, temperature hysteresis, humidity and humidity hysteresis.
Through the built-in jumper - J1 (in the box) you can choose whether, when the desired temperature and humidity are reached, the fan continues to work at minimum speed or stops. When J1 is closed – ventilation continues to operate at minimum speed. When open - stops the fan completely.

It is equipped with a 4m cable with a temperature and humidity sensor, an output fan contact and a waterproof case.

- temperature range: 20C° - 30C°
- temperature hysteresis: 2C°-8C°
- humidity range: 30% - 100%
- humidity hysteresis: 6%-30%
- size: 265mm x 300mm x 205mm
- max. Power: 2.5A
- Voltage: 230V / 50HZ
- 5V digital sensor measures temperatures from –55°C to +125°C (–67°F to +257°F)
- Accuracy: 0.5C° in an interval from -10C° to +85C°; ±4.5%rh
- Degree of protection: IP54