Water Master Smart-Drip - Irrigation system for 4, 6, 9 and 12 plants

Detailed features

• Compatibility: 4 plant system ("4 outlets") according to the Smart-Drip 4 version.
• Pump: included water pump with a flow rate of 800 L/h , 1 unit.
• Pipeline: polyethylene pipe Ø 16 mm — the kit includes 1 m × 3 pcs. (for 4-fold version) according to the official specification.
• Micro-tubing: white micro-tube 5×3 mm – 60 cm × 4 pcs. for the 4-plant version
• Angle fittings: 90° elbow Ø 16 mm – 3 pcs. for the version.
• End cap: Ø 16 mm “end cap” – 1 pc. for the version.
• Distributor (Netbow): Ø 12 cm / 5″ with 4 outlets, gray color – 4 pcs. (for the 4-plants version) according to the specification.
• "Smart VDL plug" (smart plug/control interface) – 1 pc. included.
• Other accessories: micro-tubing punch (Plastic hole punch), Microtube-dripper connector – 4 pcs.
• Application: suitable for both hydroponics and containers in the ground or greenhouse - the system provides a uniform and efficient water supply, adapted to the needs of each plant.

Recommendations for use

• Plan the positioning of the 4 plants before installation — it is recommended that each plant have one micro-tubing outlet line.
• Install the pipes and fittings in accordance with the included instructions, ensuring a level base and a stable attachment of the pump.
• Check the water source and filter (if included) — ensure clean water, free of particles that could clog the micro-tubing.
• Adjust the pump and check the flow rate — some systems require pressure adjustment based on height and distance to plants.
• Distribute the micro-tubing to the base of the plants, ensuring that each plant receives adequate supply — check the alignment of the drops.
• Inspect the system regularly — check for clogs, leaks, or blockages in the microtubing and fittings.
• When the water supply is interrupted or you take a break from growing, drain the pipes, clean the pump and store the system dry to prevent freezing or corrosion.

Benefits

The Water Master Smart-Drip system for 4, 6, 9 and 12 plants offers a ready-to-use solution for automated drip irrigation. With the included pump, tubing, micro-fittings, and miniature control (VDL plug), it allows for easy installation and start-up of an irrigation system. The organized water supply to the root zone of four plants ensures more efficient use of resources, improved plant health, and less manual intervention.