Timers and Controllers
Timers and controllers are needed to establish full and permanent climate control in your indoor rooms/tents. With their help, you can automate all factors such as humidity, temperature, and when it is "day or night" for plants.
We also offer controllers for your irrigation systems - hydroponics.
Timers (2)
Lighting (22)
Ventilation and Climate (48)
Irrigation Systems (3)
Davin DV 101 D Digital Timer
The DV-101 D is a multifunctional digital seconds time clock that helps you to water crops time controlled. All Davin switchboxes have termal fuses on every outlet-group, which you can reset manual, they protect your switchbox against fire or any other damage. Dimension: 215 x 115 x 110 Required voltage: 230Vac / 50Hz Max. Output: 6 Amp Isolation Level: IP 44
G-Systems Timer Box II 4x600W
Control panel for controlling the working process of HPS (sodium) and MH (metal-halide lamps) with a timer controlling the switching on and off of the lamps. On models with a heater output, the unit turns on when the lamps are turned off for maximum energy efficiency. The maximum permissible power of the device is up to 2000W.
Torin Sifan Aric controller with transformer 16A
Torin Sifan Aric 16A is a fan controller that regulates the voltage using microprocessor technology (digital transformer control).
- can control up to 3 fans
- working temperature: 0 - 40°C
- 1-phase power supply: 230 VAC ± 10%
- frequency: 50/60 Hz
- max. current: 16A
- length of power cable: 1.5m
- length of temp. sensor: 5m
- temp. range (Tset): 0 - 40°C
GSE TEMP. / MIN-MAX HYST. controller (1FAN) 10A
Controller of minimum and maximum temperature with hysteresis setting - setting of temperature limits. The controller keeps the temperature constant and does not allow the fans to fall below or above the set speed. Hysteresis defines temperature limits.
Ready to use, reliable, with waterproof housing, socket caps and low voltage sensor making it ideal for wet rooms. The sensor has a 4m cable that can be extended up to 50m.
Dimensions and technical data:
130x80x70mm
Designed for: 1x2300W/Bidirectional Triode Thyristor - 1x45A
Voltage: 230V / 50HZ
5V digital sensor measures temperatures from –55°C to +125°C (–67°F to +257°F)
0.5°C accuracy from –10°C to +85°C
Protection class: IP44
TechGrow - Clima Eco 5A (Minimum speed)
TechGrow - Clima Eco 5A (Minimum speed) controls the minimum fan speed until the desired temperature in the growroom is reached or maintained. This budget controller is easy to operate with - there are only two rotary knobs - to set the minimum fan speed and the desired room temperature.
- Controls the minimum fan speed until the desired temperature is reached or maintained
- Minimum fan speed setting range: 10% - 100%
- Temperature setting range: 15° - 35°C
- Hysteresis: 2°C
- Minimum required sensor: TempProbe (not included)
GSE Temp, Min Speed and Neg Pressure Controller (2 fans)
Temperature, minimum speed and negative pressure controller.
Sizes and technical data:
- Controller: W80xH80xL130mm
- Case: W150xH110xL170mm
- Designed for: 2A / 2x200W / TRIAC 2x16A
- Voltage: 230V / 50HZ
- Digital sensor 5V measures temperatures from –55°C to +125°C ( –67°F to +257°F )
- 0.5°C accuracy from –10°C to +85°C
- Protection class: IP54
Settings range:
- Temperature: 20C° to 30C°
- Minimum speed: off, 20% to 100%
- Negative pressure: 100% to 50%
Neptune Hydroponics CO2 controller with probe
The Neptune Hydroponics CO2 controller is automatically calibrated device and has an optimal operating range of 10 to 50Cº, 10 to 70% RH. The digital display and light sensor allow easy adjustment and maintenance of the set carbon dioxide level, with no supply at night. The controller can control both CO2 bottles and burners.
- CO2 measurement range: 0 - 2000ppm
- calibration: automatic calibration system
- highest CO2 setting by default: 820ppm
- lower CO2 setting by default: 780ppm
- consumption: 1.8W
TechGrow - Clima Eco 5A (Min-Max speed)
TechGrow - Clima Eco 5A (Min-Max speed) controls the minimum and maximum fan speed until the desired temperature in the growroom is reached or maintained. The controller is easy to operate with - there are only 3 rotary knobs - to set the minimum fan speed, the maximum fan speed and the desired room temperature. Ensure constant maintenance of the desired climate conditions at affordable cost!
- Controls the minimum and maximum fan speed until the desired temperature is reached or maintained
- Minimum fan speed setting range: 10% - 100%
- Maximum fan speed setting range: 50% - 100%
- Temperature setting range: 15° - 35°C
- Hysteresis: 2°C
- Minimum required sensor: TempProbe (not included)
G-Systems Timer Box 4x600W + Heating
Control panel for controlling the working process of HPS (sodium) and MH (metal-halide lamps) with a timer controlling the switching on and off of the lamps. On models with a heater output, the unit turns on when the lamps are turned off for maximum energy efficiency. The maximum permissible power of the device is up to 2000W.
Cli-mate Multi-Controller 2x16amp
Cli-mate Multi-Controller 2x16amp works like two independent temperature controllers in one device.
- Up to 32A load
- 2 external temperature sensors
- Fully adjustable, automatic temperature control
- 4 Fan inlets on the sides of the device
- Easy to calibrate using knobs
Options of use:
- Independent and specific setting for the air intake and outtake
- It can control two different rooms with independent settings
TechGrow - Clima Micro Day/Night Fan Controller 5A
TechGrow - Clima Micro Day / Night Fan Controller 5A is a controller that regulates the speed of your fan in two operating modes - day and night. You can easily set the desired speed with the rotary knobs, as well as a delay time of 0 to 10 minutes. The controller does not connect to a sensor and does not measure CO2, temperature or humidity!
- Very easy to use
- Adjustable fan speed for day and night mode
- Adjustable delay time up to 10 minutes
- Built-in light sensor