Economy class pH meter

pH meter with manual calibration.

range: pH 0.0-14.00
resolution: 0.1 pH
accuracy: 0.1 pH
calibration: manual, one point at a time
working conditions: temp. 0-50°C, humidity up to 95%
batteries: 3 pcs. LR44 1.5V / 700 hours of operation
dimensions: 150x30x24 mm / 85 g
DO NOT use distilled water for storage!
Large deviations (above 0.5 pH) may be due to the need for calibration, a dry electrode, or dead batteries.

Economy class EC-meter

EC-meter with manual calibration.


range: 0-20000 μS/cm
resolution: 100 μS/cm
accuracy: ±2%
calibration: manual, one point at a time
automatic temperature compensation
working conditions: temp. 0-50°C, humidity up to 95%
batteries: 4 pcs. LR44 1.5V / 350 hours of operation
dimensions: 150 x 30 x 24 mm / 85 g

Milwaukee pH meter pH55

Professional pH-meter

Professional Waterproof pH-meter with temperature display, automatic temperature compensation and automatic calibration in 2 points.

Function "HOLD" to save the measured value.

Replaceable sensor.

Milwaukee EC meter CD60

professional EC-meter

Professional Waterproof EC-meter with temperature display, automatic temperature compensation and automatic calibration.

Shows EC or PPM; plus the temperature of the solution.

Function "HOLD" to save the measured value.

Replaceable sensor.

peristaltic pump

Constant flow: 1.5l/h (25mL/min)
No regulation
Maximum pressure: 1.5 bar
Made of polypropylene (PP)
Peristaltic tube - Santoprene
Outlet diameter: 6mm
Dimensions: 100 x 106 x 108 mm; 500g
power: 0.42W
power supply: 230W ±10%

Milwaukee pH monitor MC110

pH-professional monitor for continuous use

pH-monitor for continuous monitoring of fertilizer or hydroponic solutions, aquariums and akvaponni systems, pools and more. A convenient feature for a visual indication when the pH of the solution passes set value (up or down at selection of the button). Manual calibration two fixed points - pH 4 and pH 7.

Separate binding sensor compatible with pH-monitors from other manufacturers.

Milwaukee EC monitor MC110

EC-professional monitor for continuous use

EC-monitor for continuous monitoring of fertilizer or hydroponic solutions, aquariums and akvaponni systems, pools and more. A convenient feature for a visual indication when the EC of the solution passes set value (up or down at selection of the button). Manual calibration EC 1413 μS / cm.

professional pH-controller with a pump for long-term use

pH monitor for constant monitoring of hydroponic or fertilizer solutions, aquariums and aquaponic systems, pools, etc. Convenient function for visual indication when the pH of the solution passes a set value (up or down, selectable by knob).
Manual calibration at 2 fixed points - pH 4 and pH 7.

Separately connectable sensor compatible with pH monitors of other manufacturers.

MP810 peristaltic pump

Constant flow: 1.5l/h (25mL/min)
No regulation
Maximum pressure: 1.5 bar
Made of polypropylene (PP)
Peristaltic tube - Santoprene
Outlet diameter: 6mm
Dimensions: 100 x 106 x 108 mm; 500g
power: 0.42W
power supply: 230W ±10%

MC 122 pH-Monitor

range: pH 0.0 to 14.00
possibility to adjust pH indication: 5.5 - 9.5
indication/output signal: when the measured value is above or below the selected setting
LED indication when set values are exceeded
Resolution: 0.1 pH
Accuracy: ±0.2pH (at 25°C)
Calibration: manual, at two points (at pH 4 or 10.7)
The set includes: 12V voltage adapter; electrode with cable 2m; pH 7 calibration fluid.
Working conditions: temp. 0-50°C, humidity up to 95%
Output power: 230W, 1A, 50Hz
Dimensions: 148.5 x 82.5 x 32 mm; 180g
Manufacturer's warranty - 2 years for the device, 6 months for the sensor. Does not apply to mechanical damage and improper operation!
It is recommended to dilute the pH-correcting solution in a ratio of 1:50!

Milwaukee EC40 EC/TDS Nutrient Meter designed for use in hydroponics, horticulture and agriculture. Make sure that your vegetables and plants are receiving the right amount of nutrient to promote healthy growth with low to zero product waste!

• provides measurements in EC, CF, ppm700 and ppm500 scales
• factory calibrated: no continuous calibration required
• batteries: 3 x 1.5V AA (included)
• length: 42 cm
• 2 years warranty

range:

• EC: 0.2-4mS/cm
• temperature: 0-50°C

accuracy (at 25°C):

• EC: ± 4%