LUMATEK

• balanced full spectrum light
• very high efficaciencyc: 2.9 µmol/J
• high PPF: 2925 µmol/s
• power consumption: 1025W (± 5%)
• footprint with supplemented CO₂: 1.5 x 1.5m
• footprint without supplemented CO₂: 1.8 x 1.8m (should be installed at higher heights)
• Lifetime: 60 000 hours
• Light source: Higher Spec Osram and Lumiled diodes
• Fully dimmable: OFF, 25%, 50%, 75%, 100% with 0-10V light dimmer (included)
• Dimensions: 1181.2 x 1091 x 105.7mm
• Weight: 18kg
• Warranty: 5 years

• Spectrum: Full Spectrum F
• Very High Efficacy: up to 2.9µmol/J
• PPF: 2925 µmol/s
• Input Power: 1025W (±5%)
• Footprint: 2.0 x 1.5m
• Lifetime: + 60 000 hours
• Light Distribution: 120°
• Light Source: Higher Spec Osram and Lumileds Diodes
• Thermal Management: Passive Cooling
• Dimmable: OFF, 25%, 50%, 75%, 100% with 0-10V Light Dimmer (Included)
• Waterproof: IP65
• Input Voltage: 220-240V, 50-60Hz
• Dimensions: 1700 x 1099.6 x 48.2mm
• Weight: 17.5 Kg
• Warranty: 5 years

LUMATEK Digital Panel PLUS 2.0 (HID+LED) is a digital lighting controller that can control all Lumatek LED lighting fixtures , drivers and ballasts. Using innovative technology, this controller intelligently monitors room temperatures, daylight hours and safely controlled dimming and on/off lighting.

• controls up to 400 ballasts or 100 LED drivers
• two control channels (Zone A and Zone B)
• up to 200 ballasts / 50 LED drivers per channel
• compatible with all Lumatek ballasts: 315W , 600W , 630W and 1000W
• compatible with all Lumatek LED drivers: 90W , 120W , 465W , 600W and 1000W
• temperature sensor for monitoring and control
• automated temperature regulation by dimming and switching for safety control
• simulates sunrise and sunset to reduce plant stress
• warranty: 3 years

LUMATEK LED Driver Remote Use 5m Extension Cables (x2). These two 5m long extension cables are designed to connect the Lumatek driver and LED fixture, in case the driver is used remote and away of the fixture. Allowing a stable and precise connection without any interference these product is composed by 2 elements:

• 5m Extension Power Cable for LED driver
• 5m Extension Dimming Cable

Lumatek Daisy-Chain 5m. Control cable is designed to daisy-chain your LUMATEK Controllable LED Fixtures allowing a stable and precise connection without any interference.

• length: 5m

T-shaped connection + 5m. control cable Lumatek T-Junction + 5m. control cable . This cable component is used to connect Lumatek Zeus LED luminaires together in series to be externally controlled with the LUMATEK Digital Panel PLUS 2.0 (HID+LED) . The set contains:

• T -Junction (3 x LLT M12 connectors - 2x female, 1x male)
• 5 m. control cable with H05RN-F 2x 0.5mm with LLT M12 male connector and LLT M12 female connector