Ventilation and Climate
For better control of your stoves, fans, and air conditioners, we offer a wide variety of:
- Voltage regulators
- Fan controllers
- Controller with settings for temperature, minimum, maximum speed, hysteresis (temperature range), control fan for exhaust air.
- CO2 controllers
- Combined controller with settings for Temperature, Minimum Speed, Humidity, and Negative Pressure controlling fans for inlet and outlet air.
TechGrow Clima Control 14A
Control the climate in your grow room effectively with TechGrow’s Clima Control 14A.
- Power supply: 100 to 240V
- Consumption: 3W (with sensor, without fan)
- Maximum fan capacity: 14 Amp / 3400W
- Adjustment range TMP: 10 - 50°C
- Adjustment range TMP hyst +/-: 0 - 5°C
- Adjustment range TMP offset: -5 to + 5°C
Lighthouse Wireless Thermostat
The Lighthouse wireless thermostat is ideal for most heating appliances. This includes infrared heaters , tube heaters , " blower " stoves, underfloor heating and mobile radiators , as well as various types of cooling appliances .
- Plug and Play ( just connect it to the power grid and turn it on , no installation required )
- automatic wireless connection between the movable thermostat and the switch
- possibility to choose a " heating " or " cooling " function, depending on the preferred device for use
- built-in temperature sensor
- multi-channel - one movable thermostat can control several switches
- removable design suitable for placement or wall mounting
- shows current and desired temperature in degrees ºC or ºF
- LCD backlight with battery life-saving automatic shutdown
- low battery warning
TechGrow S-Eco CO2 Sensor (2000ppm)
TechGrow S-Eco CO2 Sensor (2000ppm) is a budget sensor for measuring the CO2-concentration in your growroom.
- Accurate measurements of CO2-concentration in the growing room every second
- Built-in light sensor
- Automatic switching between day and night mode
- Automatic basic calibration (ABC function)
- Range: 0 - 2000ppm
- Accuracy: 75ppm
- Response time: 60seconds
- Warranty: 6 months
TechGrow S-2 CO2 Sensor (2000ppm)
TechGrow S-2 CO2 Sensor (2000ppm) measures CO2 and detects light. It is compatible with all TechGrow controllers. The sensor is equipped with a built-in calibration function so you can calibrate the CO2 sensor against outdoor air. The calibration menu is only accesible through a CO2 controller. Also equipped with a built-in switch to prevent unwanted calibration.
- range: 0 - 2000 ppm
TechGrow - CO2 Pressure Reducing Valve
TechGrow - CO2 Pressure Reducing Valve the easiest and most effective way to inject CO2 in the growroom. Connect it to the CO2-bottle to control the flow of CO2 in the room. Use in combination with TechGrow - CO2 Controllers. The product consists of:
- pressure meter
- flow meter
- electric magnetic valve
TechGrow S-4 CO2 Sensor (2000ppm)
TechGrow S-4 CO2 Sensor (2000ppm) is the all-in-one sensor measures CO2, temperature, humidity and detects light simultaneously. Also, the sensor is equipped with a built-in calibration function to calibrate the CO2 sensor against outdoor air. The calibration menu is only accesible through a CO2 controller. Also equipped with a built-in switch to prevent unwanted calibration.
- range: 0 - 2000 ppm
TechGrow T-Nano CO2 Controller ECO
The TechGrow T-Nano CO2 Controller ECO is a powerful and easy-to-use CO2 regulator from TechGrow's budget series - ECO. The T-Nano performs extremely accurate measurements regardless of the size of your indoor grow room - from small tents to very large spaces. When connected to the TechGrow S-4 sensor, the T-Nano can facilitate connection to another TechGrow controller.
key functions:
- controls: CO2
- measures: CO2
- PPM range: 300 - 2000ppm
- day/night detection: yes
- light sensor: in the CO2 sensor
power supply:
- input: 100/240V, 50/60 Hz
- CO2 output power: 100 – 220V
- consumption: 3W
- CO2 relay: 8A
- CO2 fuse: 4A
- power cable: 3 x 0.75 / 1.7m
Note: the sensor is sold separately!
TechGrow T-Micro CO2 Controller
TechGrow T-Micro CO2 Controller is the smallest TechGrow controller. A complete and very easy to operate CO2 controller. Best in its class thanks to its completely digital technique.
- Power supply: 100 to 240V (automatic)
- Power frequency: 50 to 60Hz
- Consumption: 3W (with sensor, without CO2-source)
- Adjustment range CO2 set: 300 to 2000ppm
- Adjustment range CO2 +/-: 20 to 200ppm (advice 50 ppm)
- Measurement time: 1 measurement per second
- Cable: UTP network 5m included
Note: the sensor is sold separately!
TechGrow T-1 Pro CO2 Controller
This completely redesigned controller is just as easy to use as the other TechGrow devices with which it is compatible. The TechGrow T-1 Pro CO2 Controller measures and controls the CO2 value in an area. It automatically switches between day and night modes by means of the external sensor.
- Power supply: 100 to 240V
- Consumption: 3W (with sensor, without CO2 source)
- Adjustment range CO2 set: 300 to 2000ppm
- Adjustment range CO2 +/-: 20 to 200 ppm (advice 50 ppm)
- (hysteresis/bandwidth)
- Measurement interval: 1 measurement per second
Note: the sensor is sold separately!
TechGrow T-2 Pro CO2 Controller7A
TechGrow T-2 Pro CO2 Controller7A is an unparalleled device that controls the CO2 value, temperature and humidity in your growing area.
- Power supply: 100 to 240V
- Consumption: 3W (with sensor, without CO2 source)
- Maximum power fan: 7 Amp / 1700W
- Adjustment range CO2 set: 300 to 2000ppm
- Adjustment range CO2 +/-: 20 to 200ppm (advice 50ppm)
- Adjustment range RH set: 10% - 90% RH
- Adjustment range RH +/-: 0% - 10% RH
- Adjustment range TMP set: 0 - 45°C
- Adjustment range TMP hyst +/-: 0 - 5°C
- Measurement interval: 1 measurement per second
Note: the sensor is sold separately!
TechGrow T-Mini Pro CO2 Controller
This completely redesigned controller is now easier to use and compatible with many other TechGrow products. TechGrow T-Mini Pro CO2 Controller measures, controls and displays the CO2 value and registers min/max values. It come with a built-in light sensor to automatically switch between day and night modes. There is no CO2 dispensing during the night.
- Power supply: 100 to 240V
- Consumption: 3W (with sensor, without CO2 source)
- Adjustment range CO2 set: 300 to 2000ppm
- Adjustment range CO2 +/-: 20 to 200ppm (advice 50 ppm)
- (hysteresis/bandwidth)
- Measurement interval: 1 measurement per second
Note: the sensor is sold separately!
TechGrow T-2 Pro CO2 Controller 14A
TechGrow T-2 Pro CO2 Controller 14A is an unparalleled device that controls the CO2 value, temperature and humidity in your growing area.
- Power supply: 100 to 240V
- Consumption: 3W (with sensor, without CO2 source)
- Maximum power fan: 14 Amp / 3400W
- Maximum power CO2 source: 6A / 1500W
- Maximum total power: 16A
- Adjustment range CO2 set: 300 to 2000ppm
- Adjustment range CO2 +/-: 20 to 200ppm (advice 50ppm)
- Adjustment range RH set: 10% - 90% RH
- Adjustment range RH +/-: 0% - 10% RH
- Adjustment range TMP set: 0 - 45°C
- Adjustment range TMP hyst +/-: 0 - 5°C
- Measurement interval: 1 measurement per second
Note: the sensor is sold separately!