Search

Control the climate in your grow room effectively with TechGrow’s Clima Control 7A.

• Power supply: 100 to 240V
• Consumption: 3W (with sensor, without fan)
• Maximum fan capacity: 7 Amp / 1700W
• Adjustment range ТМР: 10 - 50°C
• Adjustment range ТМР hyst +/-: 0 - 5°C
• Adjustment range temperature offset: -5 to + 5°C 

TechGrow Clima Control ECO 15A can control up to 2 fans and precisely creates the desired climate in your indoor garden. It accelerates more slowly than other controllers to achieve a more stable climate. With the rotary knobs, you can easily set the desired temperature and hysteresis, as well as the minimum and maximum fan speed.

key functions:

• controls and displays: temperature
• day/night detection: no
• light sensor: no
• heater relay: no
• temperature alarm: no

software functions:

• temp. range: 10 - 45°C
• temp. hysteresis: 0 - 7°C
• temp. settings: day
• humidity settings: no
• day/night delay: no
• min. max. values: no

power supply

• power supply: 100 - 240V
• consumption: 3W
• fuse: 15A
• max. load: 3400W
• power cable: 3 x 1.5 / 1.7m

TechGrow S-Eco CO₂ Sensor (2000ppm) is a budget sensor for measuring the CO₂-concentration in your growroom. 

• Accurate measurements of CO₂-concentration in the growing room every second
• Built-in light sensor
• Automatic switching between day and night mode
• Automatic basic calibration (ABC function)
• Range: 0 - 2000ppm
• Accuracy: 75ppm
• Response time: 60seconds
• Warranty: 6 months

Controlling the climate in your grow room with the TechGrow Clima Control Basic Plus 14A is simple but effective.

• Power supply: 100 to 240V
• Net frequency: 50 to 60Hz
• Consumption: 3W (excluding fan)
• Maximum capacity fan: 14 Amp / 3400W
• Adjustment range ТМР set: 10 - 45°C
• Adjustment range ТМР hyst +/-: 1 -7°C
• Probe: comes with a pre-mounted temperature probe on a 4.5m (15ft) cable

The Day/Night Fan Controller 7A is the easiest to use climate control device by TechGrow for your indoor garden. The controller is very efficient and fully 'plug & play' (just connect it to the mains and turn it on). To adjust the day and night speeds of your fan, you can use the two rotary knobs, and the settings will switch automatically thanks to the built-in light sensor.

key functions:

• controls: fan speed
• display: no
• day/night detection: yes
• light sensor: yes, built-in
• thermal relay: no
• temperature alarm: no

power supply:

• input: 100 - 220V
• consumption: 3W
• fuse: 8A
• triac: 12A
• power cable: 3 x 0.75 / 1.7m

Note: no connection for sensors available!

Control the climate in your grow room effectively with TechGrow’s Clima Control 14A.

• Power supply: 100 to 240V
• Consumption: 3W (with sensor, without fan)
• Maximum fan capacity: 14 Amp / 3400W
• Adjustment range TMP: 10 - 50°C
• Adjustment range TMP hyst +/-: 0 - 5°C
• Adjustment range TMP offset: -5 to + 5°C 

Effectively control the climate in your grow room with TechGrow’s Clima Control Plus 7A - both day and night.

• Power supply: 100 to 240V
• Consumption: 3W (with sensor, without fan)
• Maximum fan capacity: 7 Amp / 1700W
• Adjustment range TMP set: 0 - 50°C
• Adjustment range TMP hyst +/-: 0 - 5°C
• Adjustment range temperature offset: -5 to +5°C

The Day/Night Fan Controller 14A is the easiest to use climate control device by TechGrow for your indoor garden. The controller is very efficient and fully 'plug & play' (just connect it to the mains and turn it on). To adjust the day and night speeds of your fan, you can use the two rotary knobs, and the settings will switch automatically thanks to the built-in light sensor.

key functions:

• controls: fan speed
• display: no
• day/night detection: yes
• light sensor: yes, built-in
• thermal relay: no
• temperature alarm: no

power supply:

• input: 100 - 220V
• consumption: 3W
• fuse: 15A
• triac: 24A
• power cable: 3 x 1.5 / 1.7m

Note: no connection for sensors available!

TechGrow S-2 CO2 Sensor (2000ppm) measures CO₂ and detects light. It is compatible with all TechGrow controllers. The sensor is equipped with a built-in calibration function so you can calibrate the CO₂ sensor against outdoor air. The calibration menu is only accesible through a CO₂ controller. Also equipped with a built-in switch to prevent unwanted calibration. 

• range: 0 - 2000 ppm

The TechGrow T-Nano CO₂ Controller ECO is a powerful and easy-to-use CO₂ regulator from TechGrow's budget series - ECO. The T-Nano performs extremely accurate measurements regardless of the size of your indoor grow room - from small tents to very large spaces. When connected to the TechGrow S-4 sensor, the T-Nano can facilitate connection to another TechGrow controller.

key functions:

• controls: CO₂
• measures: CO₂
• PPM range: 300 - 2000ppm
• day/night detection: yes
• light sensor: in the CO₂ sensor

power supply:

• input: 100/240V, 50/60 Hz
• CO₂ output power: 100 – 220V
• consumption: 3W
• CO₂ relay: 8A
• CO₂ fuse: 4A
• power cable: 3 x 0.75 / 1.7m

Note: the sensor is sold separately!

Compact and extremely accurate portable handmeter. TechGrow​ HS-1 CO₂ Meter is ideal to measure the CO₂ value and temperature in a room.

• CO₂ range: 0-10000 ppm
• Temperature range: -10° to + 60° C
• Accuracy : ± 50 ppm or ± 5% of the CO₂ measurement (0-2000)
• Size: 60x170x55mm

TechGrow T-Micro CO₂ Controller is the smallest TechGrow controller. A complete and very easy to operate CO₂ controller. Best in its class thanks to its completely digital technique.

• Power supply: 100 to 240V (automatic)
• Power frequency: 50 to 60Hz
• Consumption: 3W (with sensor, without CO₂-source)
• Adjustment range CO₂ set: 300 to 2000ppm
• Adjustment range CO₂ +/-: 20 to 200ppm (advice 50 ppm)
• Measurement time: 1 measurement per second
• Cable: UTP network 5m included

Note: the sensor is sold separately!