Trotec TTK 125 S Professional Dehumidifier

Full instructions for use (English language): here *

TTK 125 S – special features:

1. Clearly positioned control panel – protected by protective grilles.
2. The standard operating hours counter of the commercial dehumidifier TTK 125 S is optionally available as a dual counter for operating and kilowatt hours.
3. A special housing reliably protects the electronics of the moisture trap TTK 125 S from dangerous connections.
4. Two stacking grooves make it possible to securely stack TTK-S commercial dehumidifiers of the same size to save space.
5. The TTK 125 S automatically ensures that the entered target value is kept constant. When this value is exceeded, the device turns off automatically and turns on again automatically when the value falls below the entered target. The pre-selection of the target value is between 50 % and 90 %, depending on the value of the room air humidity to be reached.
6. The TTK 125 S comes with an automatic defrost function. When the room temperature is below 11 °C, the evaporator will freeze during dehumidification. That's why the TTK 125 S performs fully automatic self-defrosting if necessary.
7. The TTK 125 S has a memory function. Thanks to this, the device restarts after an unexpected shutdown due to a power failure with the preselected setting as soon as the power is available again.
8. A pipe can be connected to the back of the unit for continuous draining of the condensed water. This is particularly suitable for basements or storage rooms that are subject to mold growth from excess humidity.
9. The commercial dehumidifier TTK 125 S, through its automatic operation controlled by a hygrostat, ensures an optimal room climate, e.g. in warehouses. The target humidity value can be pre-selected in percentage steps and will then be displayed together with the current actual value.
10. The TTK 125 S is also an excellent choice when it comes to using it for water damage restoration. The drying process of the spaces can be greatly accelerated in such cases of damage, as a result, the formation of mold is significantly reduced. The connecting air hose also makes it possible to dry out cavities.

Technical data:

• dehumidification at 20°C and 60% RH: 11l . / 24h
• dehumidification at 30°C and 80% RH: 28l. / 24h
• max. dehumidification: 32 l. / 24h
• operating range (temperature): 5 - 32°C
• operating range (relative humidity): 50 - 90% RH
• max. allowable pressure: 3.1MPa
• air flow rate: 250 m ³ /h
• recommended size of the building drying room: up to 60m ² / 150m ³
• Mains: 220-240V / 50Hz
• power max.: 0.5kW
• amperage: 2.4A
• water tank capacity: 6 l.
• refrigerant: propaneR290 * ; 150 gr
• GWP factor: 3
• CO ₂ equivalent: 0.00045 t
• noise levels (at 1m from the device): 52dB(A)
• dimensions L/W/H: 375 x 345 x 603mm
• min. distance from the wall or other objects: 50 cm
• weight: 26 kg